This connecting adapter easily allows you to extend portions of your system where needed. The KF-25 adapter also allows you to easily turn a joint into a vacuum monitor connection, or a point on the system where you can pull a vacuum.
60.00$
Note: Users will need a centering ring and a vacuum clamp to seal the KF-25 adapters.
A mountable lab jack is the perfect custom solution for supporting most common pieces of laboratory equipment.
Unlike others, this lab jack can be mounted on a support rod, suspending the jack in the air. This can be especially useful for lining up pieces of glassware of different heights.
When properly attached to the support rod, the mountable lab jack forms a sturdy, adjustable support platform. As an added bonus, the jack itself can also support another, secondary support rod (if needed), for maximum flexibility.
The top of the plate is covered in a cushioned pad, which will protect your valuable glassware from the metal surface below, as well as insulate your glass and equipment from the hard metal surface below.
The Viton O Ring has a low compression set and high temperature resistance. Viton is especially good for vacuum service and low gas permeability and has a useful temperature range of -30 to 200° C.
Safe Leaf Extract Solutions
340 Windmill Road
Dartmouth, Nova Scotia
B3A 1J1 Canada
M-F 9AM – 7PM EST.
Contact Us
1-888-592-0609
[email protected]
Warning: The account for safeleaf.ca needs to be reconnected.
Due to Instagram platform changes on March 2, 2020, this Instagram account needs to be reconnected to allow the feed to continue updating. Reconnect on plugin Settings page
© 2018-2020 SafeLeaf.ca – All rights reserved
