Edwards XDS35iC

Home / Products / Vacuum Pumps / Edwards XDS35iC

Edwards XDS35iC

XDS scroll pumps have become industry standard when dry pumping is essential, proving to be a robust and clean vacuum pump solution in a range of applications and processes.

XDS35i and XDS35i Enhanced pumps are available as standard pumps with gas ballast, versions of the pump with no Gas Ballast (well suited for rare gas recirculation and gas recovery applications) and the C versions of the pumps featuring Chemraz® internal valves and stainless steel fittings for extra protection from the pumped media.

The XDS46i shares many of the same features of the XDS35i but with a peak speed of 40 m3h-1. The pump has been optimised for maximum pumping speed at inlet pressures between 1 mbar and 10 mbar, making it ideally suited for LCMS and ICPMS applications requiring higher pumping speeds.

The C variant has been modified so that it is more suitable for use on vapour handling processes and may be used in some applications using corrosive substances. The C version is fitted with Chemraz® internal valve pads and stainless steel exhaust port.

Chemraz® is a registered trademark of Greene Tweed

Description

Displacement 50 or 60Hz43 m3h-1 / 25 ft3min-1
Peak pumping speed 50 or 60Hz35 m3h-1 / 21 ft3min-1
Ultimate vacuum (Total pressure)1 x 10-2 mbar / 8 x 10-3 Torr
Max inlet pressure for water vapour35 mbar / 23 Torr
Max water vapour pumping rate – GB I70 gh-1
Max water vapour pumping rate – GB II240 gh-1
Max allowed outlet pressure0.2 bar gauge / 2.9 psig*
Max allowed inlet and GB pressure0.5 bar gauge / 7 psig
Motor power0.52kW
Power connectorIEC EN60320 C19
Nominal rotation speed1750 rpm
Weight48 kg / 105 lb
Inlet flangeNW40
Exhaust flangeNW25
Noise level57 dB (A)
Vibration<4.5mms -1 (rms)
Leak tightness (static)<1 x 10-6 mbar ls-1
Operating temperature range10 to 40 °C / 50 to 104 °F
Electrical Requirements115/230 V