- Shop
- Post-ProcessingExtraction
Pre-Processing
Showing 1–16 of 145 results
Cold Traps1-Piece Glass Trap for Ai T Series -40°C & -80°C Cold Traps
Across International one-piece glass trap for Ai 1st Gen T series -40°C and -80°C cold traps.
Attention! This glass trap will NOT fit our new 2nd Gen UL/CSA certified T40 -40°C cold traps (released 9/2018).
(0 reviews)50.00$ Add to cart
Parts & Accessories3/8″ Reinforced Food Grade Vacuum Chilling Tubing -60C to +135C
Looking for flexible tubing that can take the pressure, heat and cold? This tubing has it all! It comes with an additional reinforcement embedded within its walls to withstand elevated pressure. Formulated to withstand extreme temperatures from -75°F to 275°F, this tubing will not crack or deteriorate when used in demanding food and beverage applications.
This tubing provides resistance to many harsh food media, including some animal and vegetable oils. It has excellent acid and alkali resistance, and is compatible with numerous oxidizing agents such as peroxide, hypochlorite and ozone. It also is ideal for use in clean-in-place and steam-in-place cleaning and sterilization systems. It is compatible with virtually all commercial cleaners and sanitizers and can be repeatedly autoclaved for up to five cycle times without affecting its overall service life.
Made in the USA.
(0 reviews)30.00$ Add to cart
Parts & Accessories3/8″ White Premium Food Grade Silicone Vacuum Tubing
Looking for rubber tubing that can take the heat? Silicone is a synthetic rubber that’s more resilient than natural rubber, making it a popular choice for vacuum pumps. Tubing won’t impart taste or odors and maintains its flexibility over time. Use with water, air, and food and beverage. Tubing is made from FDA-compliant resins. Material meets ASTM D2000. Tubing can be sterilized with steam (autoclaving) and radiation.
(0 reviews)25.00$ Add to cart
Parts & Accessories537°C 1/2″ Fiberglass Rope for Insulating Boiling Flask
1/2″ high-temperature, ultra-conformable fiberglass rope, they’re flexible and will conform to uneven surfaces. The looser construction also makes them more likely to absorb liquids. Push them into the groove that’s commonly built into oven doors, furnaces, and tanks.
These high quality fiberglass rope resist bleach, solvents, and most acids (do not use with hydrofluoric acid, hot phosphoric acid, and wet hydrogen chloride).
CAUTION! Always use proper protection when working with fiberglass. Avoid skin and eye contact.
(0 reviews)30.00$ Add to cart
Parts & Accessories8 x 8 mm Raschig Ring for Packable Short Path Distillation Head
These reusable raschig rings provide random and custom column packing for distillations. Proper distribution of rings allows for greater efficiency during fractioning. As condensed vapors run down the column, they cover the surface of the rings. The rings become wetted, and as boiled vapors pass through the wetted area, they tend more towards equilibrium forcing less volatile material downwards and more volatile material upwards.
(0 reviews)70.00$ Add to cart
Parts & AccessoriesAI 1/2″ Insulated Chiller Translucent Silicone Tubing – 6 Ft
Ai 1/2″ insulated chiller silicone tubing. Inner tubing comes in translucent natural color for visual contact with the flow, able to resist temperature from -60°C to 100°C.
(0 reviews)25.00$ Add to cart
Parts & AccessoriesAI 100°C Rated GL16 Chilling Fluid/Vacuum Connectors – Pack of 5
Plastic GL16 chilling fluid or vacuum connector with silicone sealing gasket, pack of 5. Fits our short path glassware and T1 cold traps.
Rated for 100°C.
(0 reviews)20.00$ Add to cart
Parts & AccessoriesAI 10L HeatedShield 400C Fabric Heating Top with Temp Controller
The Ai ultra-thick 400°C rated heating tops will keep your distillation setup at the peak of its performance, they will help prevent vapor condensation in the upper half of a flask, at the same time, protect the flask, the solutions, and the lab from drafts, which would disturb the reflux ration during fractionation, from flying glass of flask implosions in high vacuum distillations, from falling objects; and from thermal strain between top and lower half of flask during high-temp operations.
Inner fabric color may change due to pre-treatment before shipment, which ensures that no smoke or odors (caused by heat) are released into your work environment.
(0 reviews)750.00$ Add to cart
Parts & AccessoriesAI 20L HeatedShield 400C Fabric Heating Top with Temp Controller
The Ai ultra-thick 400°C heating tops will keep your distillation setup at the peak of its performance, they will help prevent vapor condensation in the upper half of a flask, at the same time, protect the flask, the solutions, and the lab from drafts, which would disturb the reflux ration during fractionation, from flying glass of flask implosions in high vacuum distillations, from falling objects; and from thermal strain between top and lower half of flask during high-temp operations.
Inner fabric color may change due to pre-treatment before shipment, which ensures that no smoke or odors (caused by heat) are released into your work environment.
(0 reviews)850.00$ Add to cart
Parts & AccessoriesAI 24/40 34/45 Heavy Wall 10L Round Bottom 3-Neck Flask
Ai 10L heavy wall, 3-neck round bottom flask with 24/40 and 34/45 standard taper joint. Comes with two vertical 34/45 side necks and one 24/40 center neck.
(0 reviews)690.00$ Add to cart
Parts & AccessoriesAI 24/40 34/45 Heavy Wall 10L Round Bottom 4-Neck Flask
Ai 10L heavy wall, 4-neck round bottom flask with 24/40 and 34/45 standard taper joint. Comes with two vertical 34/45 side necks and two 24/40 center necks.
(0 reviews)750.00$ Add to cart
Parts & AccessoriesAI 24/40 34/45 Heavy Wall 5L Round Bottom 2-Neck Flask
Ai 5L heavy wall, 2-neck round bottom flask with 24/40 and 34/45 standard taper joint. Comes with one vertical 34/45 neck and one angled 24/40 side neck.
(0 reviews)390.00$ Add to cart
Parts & AccessoriesAI 24/40 34/45 Heavy Wall 5L Round Bottom 3-Neck Flask
Ai 5L heavy wall, 3-neck round bottom flask with 24/40 and 34/45 standard taper joint. Comes with one vertical 34/45 neck, one vertical 24/40 neck, and one angled 24/40 side neck.
(0 reviews)450.00$ Add to cart
Parts & AccessoriesAI 24/40 Glass Thermowell w/ Viton Gasket for 2L, 5L, 10L System
Ai 24/40 joint glass thermowell with Viton gasket, made specifically to fit Ai 2L, 5L and 10L boiling flasks.
(0 reviews)50.00$ Add to cart
Parts & AccessoriesAI 24/40 Heavy Wall 1000mL Oval-Shaped Round Bottom Flask
Ai 24/40 standard taper joint, heavy wall 1000mL oval-shaped, round bottom flask.
(0 reviews)145.00$ Add to cart
Parts & AccessoriesAI 24/40 Heavy Wall 2000mL Oval-Shaped Round Bottom Flask
Ai 24/40 standard taper joint, heavy wall 2000mL oval-shaped, round bottom flask.
(0 reviews)150.00$ Add to cart
Safe Leaf Extract Solutions
340 Windmill Road
Dartmouth, Nova Scotia
B3A 1J1 Canada
M-F 9AM – 7PM EST.
Contact Us
1-888-592-0609
[email protected]
Quick Links
Menu
Stay up to date
WE ACCEPT
© 2018-2020 SafeLeaf.ca – All rights reserved