Looking for flexible tubing that can take the pressure, heat and cold? This tubing has it all! It comes with an additional reinforcement embedded within its walls to withstand elevated pressure. Formulated to withstand extreme temperatures from -75°F to 275°F, this tubing will not crack or deteriorate when used in demanding food and beverage applications.

This tubing provides resistance to many harsh food media, including some animal and vegetable oils. It has excellent acid and alkali resistance, and is compatible with numerous oxidizing agents such as peroxide, hypochlorite and ozone. It also is ideal for use in clean-in-place and steam-in-place cleaning and sterilization systems. It is compatible with virtually all commercial cleaners and sanitizers and can be repeatedly autoclaved for up to five cycle times without affecting its overall service life.

Made in the USA.

Looking for rubber tubing that can take the heat? Silicone is a synthetic rubber that’s more resilient than natural rubber, making it a popular choice for vacuum pumps. Tubing won’t impart taste or odors and maintains its flexibility over time. Use with water, air, and food and beverage. Tubing is made from FDA-compliant resins. Material meets ASTM D2000. Tubing can be sterilized with steam (autoclaving) and radiation.

Ai 1/2″ insulated chiller silicone tubing. Inner tubing comes in translucent natural color for visual contact with the flow, able to resist temperature from -60°C to 100°C.

Plastic GL16 chilling fluid or vacuum connector with silicone sealing gasket, pack of 5. Fits our short path glassware and T1 cold traps.

Rated for 100°C.

The Ai ultra-thick 400°C rated heating tops will keep your distillation setup at the peak of its performance, they will help prevent vapor condensation in the upper half of a flask, at the same time, protect the flask, the solutions, and the lab from drafts, which would disturb the reflux ration during fractionation, from flying glass of flask implosions in high vacuum distillations, from falling objects; and from thermal strain between top and lower half of flask during high-temp operations.

Inner fabric color may change due to pre-treatment before shipment, which ensures that no smoke or odors (caused by heat) are released into your work environment.

Ai 10L heavy wall, 3-neck round bottom flask with 24/40 and 34/45 standard taper joint. Comes with two vertical 34/45 side necks and one 24/40 center neck.

Ai 10L heavy wall, 4-neck round bottom flask with 24/40 and 34/45 standard taper joint. Comes with two vertical 34/45 side necks and two 24/40 center necks.